EVVA EPS-5 knob cylinder short

EVVA EPS-5 knob cylinder short (factory profile)

EVVA EPS-5 factory profile (Extended Profile System) is a proven, conventional locking system developed on the tumbler or locking pin principle. The system is characterised by high wear resistance. The exact key centring due to the special profile rib construction ensures that the key can be inserted without any problems. It is a patented, multiple overlapping key profile and the authorization check is carried out on several security levels.

EPS reliably protects private homes, but is also a frequently and gladly used access system in clearly structured locking systems, such as in office buildings, restaurants or residential buildings.

Patent protection until 2041

Basic length:

• from 27/27 mm
• max. up to 27/71 mm
• measured from the middle of cam
• extension in 5 mm steps
• Ordering information: the knob is always located on the inside of the cylinder.

Technical characteristics:

• compact design
• spring-loaded pin system with 5 active, spring-loaded sensing elements and up to 20 additional side codings
• integrated manipulation control of the key in the cylinder
• locking authorisation query by means of core rib profiling and profile locking bar, which is controlled spring-free via a curve in the body
• carbide drilling protection on the outside in the core and body
• high wear resistance
• cam movement 360 degrees, cam removal position 30 degrees
• width of cam: 9,3 mm
• certified according to DIN EN 1303:2015 160B0C6B

Execution:

• conventional locking system
• length profile system with large key cross-sections
• patented, multiple overlapping key profile
• vertical, easy key insertion
• cylinder body: brass matt nickel plated, cylinder core: base material brass
• lockable from the outside with key, inside with knob
• combination with electronic locking system possible

Key:

• key thickness: 2,3 mm
• serrated key made of special resistant nickel silver alloy
• exact key centring: easy insertion of the key thanks to the special profile rib construction
• with large key cross-sections
• very resistant, low wear
• optional: key caps, key with extended key neck

Options / Special equipment:

• different cylinder finish (Attention: extended delivery time)
• different knob designs, standard form AK (optional: KK, GK or X1K)
• modular design

Operational area:

• front doors, connecting doors, office doors, interior doors, exterior doors, apartment doors, gates, wooden doors, etc.
• for tubular frame doors or aluminium doors
• suitable for mortise locks according to DIN, ÖNORM or locks with PZ perforation or according to EU standards
• office building
• gastronomy
• residences
• for clearly structured locking systems
• suitable as standard for fire and smoke doors with a fire resistance duration of 90 minutes. This makes the system ideally suited for burglar-resistant doors of resistance classes 1 to 4 without further testing.

Scope of delivery:

• knob cylinder short incl. 3 or more keys
• fixing screw M5
• installation tip: When installing, ensure that there is an external projection of max. 3 mm in conjunction with a fitting that cannot be screwed off from the outside!
• Security card

Manufacturer:

EVVA Sicherheitstechnik GmbH
Höffgeshofweg 30
47807 Krefeld
www.evva.com