Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
DOM RS 8 DOM RS 8 rim cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- case length: 27 mm
- mounting diameter: 32 mm
- serrated key with rib on the side
- very high key copy protection
- for additional box locks
-
DOM ix TwinStar DOM ix TwinStar rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,5 mm
- mounting diameter: 32 mm
- reversible key with patented movable double roller
- very high key copy protection
- for additional box locks
-
DOM diamant DOM diamant rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 29 mm
- mounting diameter: 32 mm
- highest key copy protection
- cylinder body: duracast
- for additional box locks
-
ABUS Vitess.2000 ABUS Vitess.2000 rim cylinder factory profileDelivery Time: 4 - 5 weeksFeatures:
- case length: 25,3 mm
- rosette: Ø 50 mm
- mounting diameter: 28 mm
- Intop system for high technical copy protection
- 6 spring-loaded locking elements and up to 4 coding pins on two locking rows
- standard drilling protection BS01
- picking protection
-
ABUS Vitess.4000 ABUS Vitess.4000 rim cylinder factory profileDelivery Time: 4 - 5 weeksFeatures:
- case length: 25,3 mm
- rosette: Ø 50 mm
- mounting diameter: 28 mm
- Intop system for high technical copy protection
- 6 spring-loaded locking elements and up to 4 spring-loaded coding pins on two locking rows
- standard drilling protection BS01
- picking protection
-
ABUS Vitess.1000 ABUS Vitess.1000 rim cylinder factory profileDelivery Time: 4 - 5 weeksFeatures:
- case length: 25,3 mm
- rosette: Ø 50 mm
- mounting diameter: 28 mm
- Intop system for high technical copy protection
- 6 spring-loaded locking elements on one locking row
- standard drilling protection BS01
- picking protection
-
EVVA Akura EVVA Akura camlock cylinder MB30 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26 mm
- installation depth: 31,5 mm
- reversible key system
- combination with electronics possible
-
EVVA EPS-5 EVVA EPS-5 camlock cylinder MB30 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,2 mm
- installation depth: 31,2 mm
- for material thickness from 1 to 20 mm
- spring-loaded 5-pin system
- manipulation control
-
EVVA MCS EVVA MCS camlock cylinder MB30 factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,2 mm
- installation depth: 32,2 mm
- for material thickness up to 20 mm
- drilling protection
- picking and scanning protection
-
EVVA ICS EVVA ICS camlock cylinder MB30 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,2 mm
- installation depth: 31,2 mm
- for material thickness up to 20 mm
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
Configure locking system 
Compare
