Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
EVVA ICS EVVA ICS knob cylinder short factory profileDelivery Time: 3 - 5 weeksFeatures:
- knob cylinder short: from 27/27 mm
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
- pulling and impact key protection
- modular design (SYMO)
-
DORMAKABA expert plus DORMAKABA expert plus swiss knob cylinder proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- high picking and impact protection
- standard drilling protection
- modular system design
-
DORMAKABA penta DORMAKABA penta padlock VHS 2001 factory profileDelivery Time: 3 - 4 weeksFeatures:
- standard shackle height: 24 mm, Ø 7 mm
- case width: 41 mm
- forced locking
- reversible key that is technically difficult to copy
- modular system design
- 5 radially arranged pin rows
-
DORMAKABA penta DORMAKABA penta padlock VHS 2010 factory profileDelivery Time: 3 - 4 weeksFeatures:
- standard shackle height: 30 mm, Ø 9 mm
- case width: 58 mm
- forced locking
- reversible key that is technically difficult to copy
- modular system design
- 5 radially arranged pin rows
-
DORMAKABA expert plus DORMAKABA expert plus padlock VHS 2001 proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- standard shackle height: 24 mm, Ø 7 mm
- case width: 41 mm
- forced locking
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- modular system design
-
EVVA EPS-5 EVVA EPS-5 padlock H24 factory profileDelivery Time: 3 - 5 weeksFeatures:
- spring-loaded 5-pin system
- drilling protection
- manipulation control
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
-
DORMAKABA expert plus DORMAKABA expert plus padlock VHS 2010 proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- standard shackle height: 30 mm, Ø 9 mm
- case width: 58 mm
- forced locking
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- modular system design
-
EVVA Akura EVVA Akura padlock HM24 factory profileDelivery Time: 3 - 5 weeksFeatures:
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
- reversible key system
- drilling, pulling, picking and scanning protection
- combination with electronics possible
-
EVVA EPS-5 EVVA EPS-5 padlock H30 factory profileDelivery Time: 3 - 5 weeksFeatures:
- spring-loaded 5-pin system
- drilling protection
- manipulation control
- forced locking
- standard shackle height: 40 mm, Ø 10 mm
- case width: 53 mm
-
EVVA MCS EVVA MCS padlock HPM factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- carbide drilling protection
- picking and scanning protection
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
Configure locking system 
Compare
