Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
ABUS Vitess.4000 ABUS Vitess.4000 padlock 86TI/45 factory profileDelivery Time: 3 - 4 weeksFeatures:
- massive lock body made of TITALIUM™ special aluminium
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
- Intop system for high technical copy protection
- 6 spring-loaded locking elements and up to 4 spring-loaded coding pins on two locking rows
- standard drilling protection BS01
- picking protection
-
ABUS Vitess.1000 ABUS Vitess padlock factory profileDelivery Time: 4 - 5 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- case width: 50 mm
- Intop system for high technical copy protection
- 6 spring-loaded locking elements on one locking row
- standard drilling protection BS01
- picking protection
- padlock: ground brass, chrome plated
-
EVVA Akura EVVA Akura rim cylinder AZ factory profileDelivery Time: 3 - 5 weeksFeatures:
- rosette: 50 mm
- mounting diameter: 28 mm
- reversible key system
- combination with electronics possible
- prepared for EVVA additional box locks of the K900 and K9000 series
-
EVVA EPS-5 EVVA EPS-5 rim cylinder AZ factory profileDelivery Time: 3 - 5 weeksFeatures:
- case length: 20,7 mm
- rosette: Ø 50 mm
- mounting diameter: 28 mm
- spring-loaded 5-pin system
- carbide drilling protection
- manipulation control
- for EVVA additional case locks
-
EVVA MCS EVVA MCS rim cylinder AZ factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- case length: 24,8 mm
- rosette: Ø 50 mm
- mounting diameter: 28 mm
- carbide drilling protection
- picking and scanning protection
- for EVVA additional case locks
-
EVVA ICS EVVA ICS rim cylinder AZ factory profileDelivery Time: 3 - 5 weeksFeatures:
- case length: 25,7 mm
- rosette: Ø 50 mm
- mounting diameter: 28 mm
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
- for EVVA additional case locks
-
EVVA 4KS EVVA 4KS rim cylinder AZ factory profileDelivery Time: 3 - 5 weeksFeatures:
- case length: 25,3 mm
- rosette: Ø 50 mm
- mounting diameter: 28 mm
- patented springless curve technology
- carbide drilling protection
- picking and scanning protection
- for EVVA additional case locks
-
ABUS Bravus.3000 ABUS Bravus.3000 padlock proprietary profile with production at the manufactorDelivery Time: 4 - 5 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- case width: 50 mm
- patented Intellitec system for highest technical copy protection (multidimensional query)
- 6-pin system
- standard drilling protection BS01
- padlock: ground brass, chrome-plated
-
EVVA Akura EVVA Akura rim cylinder AZI factory profileDelivery Time: 3 - 5 weeksFeatures:
- mounting diameter: 28 mm
- reversible key system
- combination with electronics possible
- prepared for ABUS®-additional locks
-
EVVA EPS-5 EVVA EPS-5 rim cylinder AZI factory profileDelivery Time: 3 - 5 weeksFeatures:
- case length: 25,6 mm
- mounting diameter: 28 mm
- spring-loaded 5-pin system
- manipulation control
- for additional case locks
Configure locking system 
Compare
