Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
EVVA 4KS EVVA 4KS half cylinder short factory profileDelivery Time: 3 - 5 weeksFeatures:
- half cylinder short: 27/10 mm
- patented springless curve technology
- carbide drilling protection
- picking and scanning protection
- pulling and impact key protection
- modular design (SYMO)
-
DORMAKABA penta DORMAKABA penta rim cylinder AZ 1007 factory profileDelivery Time: 3 - 4 weeksFeatures:
- case length: 24,3 mm
- mounting diameter: 28,95 mm
- drive arm centrally arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
ISEO GERA WS-MC ISEO GERA WS-MC rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- magnetically coded reversible key system
- 5 pin locking elements
- 1 additional active springless pin
- case length: 27,5 mm
- mounting diameter: 30 mm
-
DORMAKABA expert plus DORMAKABA expert plus swiss half cylinder proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- high picking and impact protection
- standard drilling protection
- modular system design
-
EVVA Akura EVVA Akura camlock cylinder MB22 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 27 mm
- installation depth: 32,5 mm
- reversible key system
- combination with electronics possible
-
EVVA EPS-5 EVVA EPS-5 camlock cylinder MB19 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 35,9 mm
- for material thickness up to 14 mm
- spring-loaded 5-pin system
- manipulation control
-
EVVA MCS EVVA MCS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,5 mm
- installation depth: 32,5 mm
- for material thickness up to 14 mm
- drilling protection
- picking and scanning protection
-
EVVA ICS EVVA ICS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 28 mm
- for material thickness up to 14 mm
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
-
EVVA 4KS EVVA 4KS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 28,2 mm
- for material thickness up to 17 mm
- patented springless curve technology
- picking and scanning protection
-
DORMAKABA penta DORMAKABA penta rim cylinder AK 348 factory profileDelivery Time: 3 - 4 weeksFeatures:
- case length: 31 mm
- mounting diameter: 29 mm
- drive arm eccentrically arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
Configure locking system 
Compare
