Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
WINKHAUS keyTec N-tra WINKHAUS keyTec N-tra rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,7 mm / 33,8 mm
- mounting diameter: 32 / 29 / 28 mm
- for door thicknesses 40 - 90 mm
- manipulation protection
- 13,3 mm key shaft for security fittings
- optional for ABUS, IKON or WINKHAUS case locks
-
DORMAKABA penta DORMAKABA penta rim cylinder AZ 1007 factory profileDelivery Time: 3 - 4 weeksFeatures:
- case length: 24,3 mm
- mounting diameter: 28,95 mm
- drive arm centrally arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
ISEO GERA WS-MC ISEO GERA WS-MC rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- magnetically coded reversible key system
- 5 pin locking elements
- 1 additional active springless pin
- case length: 27,5 mm
- mounting diameter: 30 mm
-
DORMAKABA expert plus DORMAKABA expert plus swiss half cylinder proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- high picking and impact protection
- standard drilling protection
- modular system design
-
WINKHAUS keyTec ON-tra+ WINKHAUS keyTec ON-tra+ padlock proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- manipulation protection
- 13,3 mm key shaft for security fittings
-
WINKHAUS keyTec RPE WINKHAUS keyTec RPE padlock proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- technical copy protection through WINKHAUS protectBall
- 13,1 mm key shaft for security fittings
-
WINKHAUS keyTec X-tra WINKHAUS keyTec X-tra padlock factory profileDelivery Time: 5 - 6 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- high manipulation protection
- 13,5 mm key shaft for security fittings
-
WINKHAUS keyTec N-tra WINKHAUS keyTec N-tra padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- manipulation protection
- 13,3 mm key shaft for security fittings
-
DORMAKABA penta DORMAKABA penta rim cylinder AK 348 factory profileDelivery Time: 3 - 4 weeksFeatures:
- case length: 31 mm
- mounting diameter: 29 mm
- drive arm eccentrically arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
ISEO GERA WS-MC ISEO GERA WS padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
Configure locking system 
Compare
