Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
EVVA 4KS EVVA 4KS half cylinder short factory profileDelivery Time: 3 - 5 weeksFeatures:
- half cylinder short: 27/10 mm
- patented springless curve technology
- carbide drilling protection
- picking and scanning protection
- pulling and impact key protection
- modular design (SYMO)
-
DORMAKABA penta DORMAKABA penta rim cylinder AZ 1007 factory profileDelivery Time: 2 - 3 weeksFeatures:
- case length: 24,3 mm
- mounting diameter: 28,95 mm
- drive arm centrally arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
DORMAKABA expert plus DORMAKABA expert plus swiss half cylinder proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- high picking and impact protection
- standard drilling protection
- modular system design
-
DORMAKABA penta DORMAKABA penta rim cylinder AK 348 factory profileDelivery Time: 2 - 3 weeksFeatures:
- case length: 31 mm
- mounting diameter: 29 mm
- drive arm eccentrically arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
DORMAKABA penta DORMAKABA penta padlock VHS 2001 factory profileDelivery Time: 2 - 3 weeksFeatures:
- standard shackle height: 24 mm, Ø 7 mm
- case width: 41 mm
- forced locking
- reversible key that is technically difficult to copy
- modular system design
- 5 radially arranged pin rows
-
DORMAKABA expert plus DORMAKABA expert plus rim cylinder AZ 1007 proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- case length: 24,3 mm
- mounting diameter: 28,95 mm
- drive arm centrally arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
DORMAKABA penta DORMAKABA penta padlock VHS 2010 factory profileDelivery Time: 2 - 3 weeksFeatures:
- standard shackle height: 30 mm, Ø 9 mm
- case width: 58 mm
- forced locking
- reversible key that is technically difficult to copy
- modular system design
- 5 radially arranged pin rows
-
DORMAKABA expert plus DORMAKABA expert plus rim cylinder AZ 918 proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- case length: 21,8 mm
- mounting diameter: 28 mm
- drive arm eccentrically arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
EVVA Akura EVVA Akura rim cylinder AZ factory profileDelivery Time: 3 - 5 weeksFeatures:
- rosette: 50 mm
- mounting diameter: 28 mm
- reversible key system
- combination with electronics possible
- prepared for EVVA additional box locks of the K900 and K9000 series
-
EVVA EPS-5 EVVA EPS-5 rim cylinder AZ factory profileDelivery Time: 3 - 5 weeksFeatures:
- case length: 20,7 mm
- rosette: Ø 50 mm
- mounting diameter: 28 mm
- spring-loaded 5-pin system
- carbide drilling protection
- manipulation control
- for EVVA additional case locks
Configure locking system 
Compare
