Lock cylinder
Locking cylinders shall be protected against breaking, drilling, pulling and against all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
WINKHAUS keyTec N-tra WINKHAUS keyTec N-tra rim cylinder factory profileDelivery Time: 2 - 3 weeksFeatures:
- case length: 24,7 mm / 33,8 mm
- mounting diameter: 32 / 29 / 28 mm
- for door thicknesses 40 - 90 mm
- manipulation protection
- 13,3 mm key shaft for security fittings
- optional for ABUS, IKON or WINKHAUS case locks
-
DORMAKABA penta DORMAKABA penta rim cylinder AZ 1007 factory profileDelivery Time: 3 - 4 weeksFeatures:
- case length: 24,3 mm
- mounting diameter: 28,95 mm
- drive arm centrally arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
DOM RS 8 DOM RS 8 half cylinder EXPRESS factory profileDelivery Time: 5 - 7 business daysFeatures:
- express delivery
- serrated key with rib on the side
- very high key copy protection
- drilling protection according to VdS B+
- solid brass cylinder, dull nickel
-
DORMAKABA expert plus DORMAKABA expert plus swiss half cylinder proprietary profile with production at the manufactorDelivery Time: 5 - 6 weeksFeatures:
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- high picking and impact protection
- standard drilling protection
- modular system design
-
DOM ix Teco® (7TE) DOM ix Teco® (7TE) camlock cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with special high-low milling
- with additional stamped recess
- very high key copy protection
- cylinder body: brass, dull nickel
-
WINKHAUS keyTec ON-tra+ WINKHAUS keyTec ON-tra+ padlock proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- manipulation protection
- 13,3 mm key shaft for security fittings
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar camlock cylinder 2-in-1 factory profileDelivery Time: 2 - 3 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
-
KESO 8000Ω² KESO 8000Ω² knob cylinder 81.OY19 with high drilling protection proprietary profileDelivery Time: 5 - 8 business daysFeatures:
- innovative modular system
- active copy protection Omega²
- high drilling protection
- with priority function
- cylinder body: brass
- connecting bar: brass
-
WINKHAUS keyTec RPE WINKHAUS keyTec RPE padlock proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- technical copy protection through WINKHAUS protectBall
- 13,1 mm key shaft for security fittings
-
WINKHAUS keyTec X-tra WINKHAUS keyTec X-tra padlock factory profileDelivery Time: 5 - 6 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- high manipulation protection
- 13,5 mm key shaft for security fittings
Configure locking system 
Compare
