Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
WINKHAUS keyTec ON-tra+ WINKHAUS keyTec ON-tra+ rim cylinder proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,7 mm / 33,8 mm
- mounting diameter: 32 / 29 / 28 mm
- for door thicknesses 40 - 90 mm
- manipulation protection
- 13,3 mm key shaft for security fittings
- optional for ABUS, IKON or WINKHAUS case locks
-
WINKHAUS keyTec RPE WINKHAUS keyTec RPE rim cylinder proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,7 mm
- rosette: Ø 43,8 mm
- mounting diameter: 32 mm
- for door thicknesses 40 - 75 mm
- technical copy protection through WINKHAUS protectBall
- 13,1 mm key shaft for security fittings
-
WINKHAUS keyTec X-tra WINKHAUS keyTec X-tra rim cylinder factory profileDelivery Time: 5 - 6 weeksFeatures:
- case length: 24,7 mm
- rosette: Ø 43,8 mm
- mounting diameter: 32 mm
- for door thicknesses 40 - 75 mm
- high manipulation protection
- 13,5 mm key shaft for security fittings
-
WINKHAUS keyTec N-tra WINKHAUS keyTec N-tra rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,7 mm / 33,8 mm
- mounting diameter: 32 / 29 / 28 mm
- for door thicknesses 40 - 90 mm
- manipulation protection
- 13,3 mm key shaft for security fittings
- optional for ABUS, IKON or WINKHAUS case locks
-
WINKHAUS keyTec ON-tra+ WINKHAUS keyTec ON-tra+ padlock proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- manipulation protection
- 13,3 mm key shaft for security fittings
-
WINKHAUS keyTec RPE WINKHAUS keyTec RPE padlock proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- technical copy protection through WINKHAUS protectBall
- 13,1 mm key shaft for security fittings
-
WINKHAUS keyTec X-tra WINKHAUS keyTec X-tra padlock factory profileDelivery Time: 5 - 6 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- high manipulation protection
- 13,5 mm key shaft for security fittings
-
WINKHAUS keyTec N-tra WINKHAUS keyTec N-tra padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- manipulation protection
- 13,3 mm key shaft for security fittings
-
EVVA Akura EVVA Akura rim cylinder AZ factory profileDelivery Time: 3 - 5 weeksFeatures:
- rosette: 50 mm
- mounting diameter: 28 mm
- reversible key system
- combination with electronics possible
- prepared for EVVA additional box locks of the K900 and K9000 series
-
EVVA EPS-5 EVVA EPS-5 rim cylinder AZ factory profileDelivery Time: 3 - 5 weeksFeatures:
- case length: 20,7 mm
- rosette: Ø 50 mm
- mounting diameter: 28 mm
- spring-loaded 5-pin system
- carbide drilling protection
- manipulation control
- for EVVA additional case locks
Configure locking system 
Compare
