Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
EVVA ICS EVVA ICS half cylinder short factory profileDelivery Time: 3 - 5 weeksFeatures:
- half cylinder short: 27/10 mm
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
- pulling and impact key protection
- modular design (SYMO)
-
EVVA 4KS EVVA 4KS half cylinder short factory profileDelivery Time: 3 - 5 weeksFeatures:
- half cylinder short: 27/10 mm
- patented springless curve technology
- carbide drilling protection
- picking and scanning protection
- pulling and impact key protection
- modular design (SYMO)
-
ISEO GERA WS-MC ISEO GERA WS-MC rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- magnetically coded reversible key system
- 5 pin locking elements
- 1 additional active springless pin
- case length: 27,5 mm
- mounting diameter: 30 mm
-
EVVA Akura EVVA Akura camlock cylinder MB22 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 27 mm
- installation depth: 32,5 mm
- reversible key system
- combination with electronics possible
-
EVVA EPS-5 EVVA EPS-5 camlock cylinder MB19 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 35,9 mm
- for material thickness up to 14 mm
- spring-loaded 5-pin system
- manipulation control
-
KESO 8000Ω² KESO 8000Ω² knob cylinder 81.OY19 with high drilling protection proprietary profileDelivery Time: 5 - 8 business daysFeatures:
- innovative modular system
- active copy protection Omega²
- high drilling protection
- with priority function
- cylinder body: brass
- connecting bar: brass
-
EVVA MCS EVVA MCS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,5 mm
- installation depth: 32,5 mm
- for material thickness up to 14 mm
- drilling protection
- picking and scanning protection
-
EVVA ICS EVVA ICS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 28 mm
- for material thickness up to 14 mm
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
-
EVVA 4KS EVVA 4KS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 28,2 mm
- for material thickness up to 17 mm
- patented springless curve technology
- picking and scanning protection
-
ISEO GERA WS-MC ISEO GERA WS padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
Configure locking system 
Compare
