Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
WINKHAUS keyTec ON-tra+ WINKHAUS keyTec ON-tra+ rim cylinder proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,7 mm / 33,8 mm
- mounting diameter: 32 / 29 / 28 mm
- for door thicknesses 40 - 90 mm
- manipulation protection
- 13,3 mm key shaft for security fittings
- optional for ABUS, IKON or WINKHAUS case locks
-
ISEO CSR R9 Country ISEO CSR R9 Country half cylinder + ABUS padlock 86TI/45 factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- stainless steel core pins
- solid lock body made of TITALIUM™ special aluminium
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
-
WINKHAUS keyTec RPE WINKHAUS keyTec RPE rim cylinder proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,7 mm
- rosette: Ø 43,8 mm
- mounting diameter: 32 mm
- for door thicknesses 40 - 75 mm
- technical copy protection through WINKHAUS protectBall
- 13,1 mm key shaft for security fittings
-
WINKHAUS keyTec X-tra WINKHAUS keyTec X-tra rim cylinder factory profileDelivery Time: 2 - 3 weeksFeatures:
- case length: 24,7 mm
- rosette: Ø 43,8 mm
- mounting diameter: 32 mm
- for door thicknesses 40 - 75 mm
- high manipulation protection
- 13,5 mm key shaft for security fittings
-
WINKHAUS keyTec N-tra WINKHAUS keyTec N-tra rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,7 mm / 33,8 mm
- mounting diameter: 32 / 29 / 28 mm
- for door thicknesses 40 - 90 mm
- manipulation protection
- 13,3 mm key shaft for security fittings
- optional for ABUS, IKON or WINKHAUS case locks
-
DORMAKABA penta DORMAKABA penta rim cylinder AZ 1007 factory profileDelivery Time: 2 - 3 weeksFeatures:
- case length: 24,3 mm
- mounting diameter: 28,95 mm
- drive arm centrally arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
DOM RS 8 DOM RS 8 half cylinder EXPRESS factory profileDelivery Time: 5 - 7 business daysFeatures:
- express delivery
- serrated key with rib on the side
- very high key copy protection
- drilling protection according to VdS B+
- solid brass cylinder, dull nickel
-
ISEO GERA WS-MC ISEO GERA WS-MC rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- magnetically coded reversible key system
- 5 pin locking elements
- 1 additional active springless pin
- case length: 27,5 mm
- mounting diameter: 30 mm
-
DORMAKABA expert plus DORMAKABA expert plus swiss half cylinder proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- high picking and impact protection
- standard drilling protection
- modular system design
-
DOM ix Teco® (7TE) DOM ix Teco® (7TE) camlock cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with special high-low milling
- with additional stamped recess
- very high key copy protection
- cylinder body: brass, dull nickel
Configure locking system 
Compare
