Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
EVVA MCS EVVA MCS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,5 mm
- installation depth: 32,5 mm
- for material thickness up to 14 mm
- drilling protection
- picking and scanning protection
-
EVVA ICS EVVA ICS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 28 mm
- for material thickness up to 14 mm
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
-
EVVA 4KS EVVA 4KS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 28,2 mm
- for material thickness up to 17 mm
- patented springless curve technology
- picking and scanning protection
-
DORMAKABA penta DORMAKABA penta rim cylinder AK 348 factory profileDelivery Time: 3 - 4 weeksFeatures:
- case length: 31 mm
- mounting diameter: 29 mm
- drive arm eccentrically arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
DOM RS 8 DOM RS 8 camlock cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- serrated key with rib on the side
- very high key copy protection
-
DOM ix TwinStar DOM ix TwinStar camlock cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with patented movable double roller
- very high key copy protection
-
DORMAKABA expert plus DORMAKABA expert plus camlock cylinder BMZ 1031 proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- locking path: 90°
- clamping dimension (standard closing lever): 25,5 mm
- installation depth: 35,7 mm
- reversible key that is technically difficult to copy
- high picking and impact protection
- modular system design
-
EVVA Akura EVVA Akura camlock cylinder MB27 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 27,7 mm
- installation depth: 32,7 mm
- reversible key system
- combination with electronics possible
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar rim cylinder 2-in-1 factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,5 mm
- mounting diameter: 32 mm
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
- for additional box locks
-
EVVA EPS-5 EVVA EPS-5 camlock cylinder MB23G factory profileDelivery Time: 3 - 5 weeks- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,4 mm
- installation depth: 31,4 mm
- for material thickness up to 17 mm
- spring-loaded 5-pin system
- drilling protection
- manipulation control
Configure locking system 
Compare
