Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
DOM ix Teco® (7TE) DOM ix Teco® (7TE) half cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- reversible key with special high-low milling
- with additional stamped recess
- very high key copy protection
- cylinder body: brass, dull nickel
- optional modular design
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar half cylinder 2-in-1 factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
- drilling protection according to VdS B
- cylinder made of solid brass, dull nickel
-
ISEO CSR R9 Country ISEO CSR R9 Country rim cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- drilling protection
- stainless steel core pins
- mounting diameter: 35 mm
-
ISEO GERA WS ISEO GERA WS padlock factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
DORMAKABA penta DORMAKABA penta camlock cylinder BMZ 1031 factory profileDelivery Time: 3 - 4 weeksFeatures:
- locking path: 90°
- clamping dimension (standard closing lever): 25,5 mm
- installation depth: 35,7 mm
- reversible key that is technically difficult to copy
- high picking and impact protection
- modular system design
-
DOM RS 8 DOM RS 8 half cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- serrated key with rib on the side
- very high key copy protection
- drilling protection according to VdS B+
- solid brass cylinder, dull nickel
-
DOM ix TwinStar DOM ix TwinStar half cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key with patented movable double roller
- very high key copy protection
- drilling protection according to VdS B+
- cylinder made of solid brass, dull nickel
-
DOM diamant DOM diamant half cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- modular construction with chrome-nickel-steel connecting bar
- drilling protection according to VdS BZ+
- highest key copy protection
- cylinder body: steel/duracast
-
DOM rs Sirius® DOM rs Sirius (RS7SI) padlock proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- clear shackle height: 32,5 mm, Ø 8,74 mm
- case width: 52 mm
- padlock: solid brass black chrome plated
- nickel silver serrated key
- technical key copy protection "starline"
- certified according to DIN EN 1303 160B0C6C
- certified according to SKG**
-
ISEO GERA WS-MC ISEO GERA WS camlock cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- locking path: 90°
- clamping dimension (standard closing lever): 25 mm
- installation depth: 30,5 mm
Configure locking system 
Compare
