Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
DOM RS 8 DOM RS 8 camlock cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- serrated key with rib on the side
- very high key copy protection
-
DOM ix TwinStar DOM ix TwinStar camlock cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with patented movable double roller
- very high key copy protection
-
ISEO GERA WS-MC ISEO GERA WS padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
DORMAKABA expert plus DORMAKABA expert plus camlock cylinder BMZ 1031 proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- locking path: 90°
- clamping dimension (standard closing lever): 25,5 mm
- installation depth: 35,7 mm
- reversible key that is technically difficult to copy
- high picking and impact protection
- modular system design
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar rim cylinder 2-in-1 factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,5 mm
- mounting diameter: 32 mm
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
- for additional box locks
-
DORMAKABA penta DORMAKABA penta padlock VHS 2001 factory profileDelivery Time: 3 - 4 weeksFeatures:
- standard shackle height: 24 mm, Ø 7 mm
- case width: 41 mm
- forced locking
- reversible key that is technically difficult to copy
- modular system design
- 5 radially arranged pin rows
-
DOM RS 8 DOM RS 8 rim cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- case length: 27 mm
- mounting diameter: 32 mm
- serrated key with rib on the side
- very high key copy protection
- for additional box locks
-
DOM ix TwinStar DOM ix TwinStar rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,5 mm
- mounting diameter: 32 mm
- reversible key with patented movable double roller
- very high key copy protection
- for additional box locks
-
DOM diamant DOM diamant rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 29 mm
- mounting diameter: 32 mm
- highest key copy protection
- cylinder body: duracast
- for additional box locks
-
DORMAKABA expert plus DORMAKABA expert plus rim cylinder AZ 1007 proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- case length: 24,3 mm
- mounting diameter: 28,95 mm
- drive arm centrally arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
Configure locking system 
Compare
