Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
DORMAKABA expert plus DORMAKABA expert plus half cylinder proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- high picking and impact protection
- standard drilling protection
- modular system design
-
ABUS Magtec.2500 ABUS Magtec.2500 half cylinder proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- magnetic technology in the key and cylinder
- modular design as standard
- climate-neutral product
- cylinder body: Xerol
- increased drilling and pulling protection
-
DOM ix Teco® (7TE) DOM ix Teco® (7TE) half cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- reversible key with special high-low milling
- with additional stamped recess
- very high key copy protection
- cylinder body: brass, dull nickel
- optional modular design
-
WINKHAUS keyTec ON-tra+ WINKHAUS keyTec ON-tra+ camlock cylinder proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- locking path/lever path: 90°
- clamping dimension (lever H1): 30 mm
- installation depth: 40 mm
- for material thicknesses up to 18 mm
- manipulation protection
- 13,3 mm key shaft for security fittings
-
EVVA Akura EVVA Akura half cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- reversible key system
- magnetic copy protection (optional)
- modular design
- drilling and pulling protection
- picking and scanning protection
- combination with electronics possible
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar half cylinder 2-in-1 factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
- drilling protection according to VdS B
- cylinder made of solid brass, dull nickel
-
WILKA Carat S3 WILKA Carat S3 camlock cylinder 3650 proprietary profile with production at the manufactorDelivery Time: 6 - 8 weeksFeatures:
- comfortable reversible key system
- locking path: 90°, adjustable in 45° steps
- installation depth: 43 mm
- mounting hole: Ø 27,7 mm lateral reduced to 24,3 mm
- forced closure
-
WILKA Carat S1 WILKA Carat S1 camlock cylinder 1250 proprietary profile with production at the manufactorDelivery Time: 6 - 8 weeksFeatures:
- user-friendly serrated key system
- locking path: 90°, adjustable in 45° steps
- installation depth: 43 mm
- mounting hole: Ø 27,7 mm lateral reduced to 24,3 mm
- forced closure
-
ISEO GERA WS ISEO GERA WS padlock factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
WINKHAUS keyTec RPE WINKHAUS keyTec RPE camlock cylinder proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- locking path/closing lever path: 90°
- clamping dimension (lever H1): 30 mm
- installation depth: 40 mm
- for material thicknesses up to 18 mm
- technical copy protection through WINKHAUS protectBall
- 13,1 mm key shaft for security fittings
Configure locking system 
Compare
