Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
WINKHAUS keyTec N-tra WINKHAUS keyTec N-tra rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- case length: 24,7 mm / 33,8 mm
- mounting diameter: 32 / 29 / 28 mm
- for door thicknesses 40 - 90 mm
- manipulation protection
- 13,3 mm key shaft for security fittings
- optional for ABUS, IKON or WINKHAUS case locks
-
WILKA SI6 WILKA SI6 camlock cylinder 1253 factory profileDelivery Time: 6 - 8 weeksFeatures:
- user-friendly serrated key system
- highest patented key copy protection
- locking path: 90°, adjustable in 45° steps
- installation depth: 43 mm
- mounting hole: Ø 27,7 mm lateral reduced to 24,3 mm
- forced closure
- for Renz mailboxes
-
WILKA 3VS WILKA 3VS camlock cylinder 3657 factory profileDelivery Time: 6 - 8 weeksFeatures:
- comfortable reversible key system
- highest patented key copy protection
- locking path: 90°, adjustable in 45° steps
- installation depth: 43 mm
- mounting hole: Ø 27,7 mm lateral reduced to 24,3 mm
- forced closure
- for Renz mailboxes
-
DORMAKABA penta DORMAKABA penta rim cylinder AZ 1007 factory profileDelivery Time: 3 - 4 weeksFeatures:
- case length: 24,3 mm
- mounting diameter: 28,95 mm
- drive arm centrally arranged
- reversible key that is technically difficult to copy
- modular system design
- for additional box locks
-
ISEO GERA WS-MC ISEO GERA WS-MC rim cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- magnetically coded reversible key system
- 5 pin locking elements
- 1 additional active springless pin
- case length: 27,5 mm
- mounting diameter: 30 mm
-
ABUS Magtec.2500 ABUS Magtec.2500 camlock cylinder proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- magnetic technology in the key and cylinder
- climate-neutral product
- cylinder body: nickel plated brass, Xerol core
- increased drilling protection
-
DOM ix Teco® (7TE) DOM ix Teco® (7TE) camlock cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with special high-low milling
- with additional stamped recess
- very high key copy protection
- cylinder body: brass, dull nickel
-
WINKHAUS keyTec ON-tra+ WINKHAUS keyTec ON-tra+ padlock proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- manipulation protection
- 13,3 mm key shaft for security fittings
-
EVVA Akura EVVA Akura camlock cylinder MB22 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 27 mm
- installation depth: 32,5 mm
- reversible key system
- combination with electronics possible
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar camlock cylinder 2-in-1 factory profileDelivery Time: 1 - 2 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
Configure locking system 
Compare
