Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
KESO 8000Ω² KESO 8000Ω² half cylinder 81.C14 VdS A proprietary profileDelivery Time: 5 - 8 business daysFeatures:
- innovative modular system
- active copy protection Omega²
- increased drilling protection certified according to VdS A
- cylinder body: brass
- connecting bar: brass
-
DORMAKABA expert plus DORMAKABA expert plus padlock VHS 2001 proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- standard shackle height: 24 mm, Ø 7 mm
- case width: 41 mm
- forced locking
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- modular system design
-
KESO 8000Ω² KESO 8000Ω² half cylinder 81.D14 VdS B proprietary profileDelivery Time: 5 - 8 business daysFeatures:
- innovative modular system
- active copy protection Omega²
- high drilling protection certified according to VdS B
- cylinder body: brass
- connecting bar: brass
-
EVVA EPS-5 EVVA EPS-5 padlock H24 factory profileDelivery Time: 3 - 5 weeksFeatures:
- spring-loaded 5-pin system
- drilling protection
- manipulation control
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
-
DORMAKABA expert plus DORMAKABA expert plus padlock VHS 2010 proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- standard shackle height: 30 mm, Ø 9 mm
- case width: 58 mm
- forced locking
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- modular system design
-
EVVA Akura EVVA Akura padlock HM24 factory profileDelivery Time: 3 - 5 weeksFeatures:
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
- reversible key system
- drilling, pulling, picking and scanning protection
- combination with electronics possible
-
KESO 8000Ω² KESO 8000Ω² half cylinder 81.E14 VdS BZ(+) proprietary profileDelivery Time: 5 - 8 business daysFeatures:
- innovative modular system
- active copy protection Omega²
- high protection against drilling and pulling certified according to VdS BZ(+)
- cylinder body: chrome nickel steel
- connecting bar: chrome nickel steel
-
EVVA EPS-5 EVVA EPS-5 padlock H30 factory profileDelivery Time: 3 - 5 weeksFeatures:
- spring-loaded 5-pin system
- drilling protection
- manipulation control
- forced locking
- standard shackle height: 40 mm, Ø 10 mm
- case width: 53 mm
-
EVVA MCS EVVA MCS padlock HPM factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- carbide drilling protection
- picking and scanning protection
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
-
EVVA ICS EVVA ICS padlock HPM factory profileDelivery Time: 3 - 5 weeksFeatures:
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
Configure locking system 
Compare
