Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
IKON SK6 FP04 IKON SK6 FP04 camlock cylinder factory profileDelivery Time: 2 - 4 weeksFeatures:
- conventional locking system
- 6-pin system
- locking path and closing lever path 90° left or right
- core pins made of wear-resistant special bronze
- cylinder finish: brass matt chrome plated
- reinforced key insertion
-
KESO 8000Ω² KESO 8000Ω² double cylinder 81.D15 VdS B proprietary profileDelivery Time: 5 - 8 business daysFeatures:
- innovative modular system
- active copy protection Omega²
- high protection against drilling certified according to VdS B
- cylinder body: brass
- connecting bar: brass
-
IKON SK6 DP06 IKON SK6 triangular profile DP06 camlock cylinder factory profileDelivery Time: 2 - 4 weeksFeatures:
- conventional locking system
- 6-pin system
- locking path and closing lever path 90° left or right
- standard drilling protection
- high protection against picking and bumping
- high protection against core pulling
- triangular profile grooves on long sides of the key
-
KESO 8000Ω² KESO 8000Ω² double cylinder 81.E15 VdS BZ(+) proprietary profileDelivery Time: 5 - 8 business daysFeatures:
- innovative modular system
- active copy protection Omega²
- high protection against drilling and pulling certified according to VdS BZ(+)
- cylinder body: chrome nickel steel
- connecting bar: chrome nickel steel
-
ISEO GERA WS ISEO GERA WS camlock cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- locking path: 90°
- clamping dimension (standard closing lever): 25 mm
- installation depth: 30,5 mm
-
DOM rs Sirius® DOM rs Sirius (RS7SI) camlock cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- nickel silver serrated key
- technical key copy protection "starline"
-
IKON SK6 FP04 IKON SK6 FP04 padlock factory profileDelivery Time: 2 - 4 weeksFeatures:
- conventional locking system
- 6-pin system
- core pins made of wear-resistant special bronze
- reinforced key insertion
- steel shackle hardened and chrome plated
- with forced locking
-
ISEO CSR R9 Country ISEO CSR R9 Country camlock cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- drilling protection
- locking path: 90°
- clamping dimension (standard closing lever): 23 mm
- installation depth: 30,5 mm
-
IKON SK6 DP06 IKON SK6 triangular profile DP06 padlock factory profileDelivery Time: 2 - 4 weeksFeatures:
- conventional locking system
- 6-pin system
- standard drilling protection
- high protection against picking and bumping
- high protection against core pulling
- triangular profile grooves on long sides of the key
- steel shackle hardened and chrome plated
-
WINKHAUS keyTec ON-tra+ WINKHAUS keyTec ON-tra+ camlock cylinder proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- locking path/lever path: 90°
- clamping dimension (lever H1): 30 mm
- installation depth: 40 mm
- for material thicknesses up to 18 mm
- manipulation protection
- 13,3 mm key shaft for security fittings
Configure locking system 
Compare
