Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
WINKHAUS keyTec ON-tra+ WINKHAUS keyTec ON-tra+ padlock proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- manipulation protection
- 13,3 mm key shaft for security fittings
-
EVVA Akura EVVA Akura camlock cylinder MB22 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 27 mm
- installation depth: 32,5 mm
- reversible key system
- combination with electronics possible
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar camlock cylinder 2-in-1 factory profileDelivery Time: 1 - 2 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
-
EVVA EPS-5 EVVA EPS-5 camlock cylinder MB19 factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 35,9 mm
- for material thickness up to 14 mm
- spring-loaded 5-pin system
- manipulation control
-
WINKHAUS keyTec RPE WINKHAUS keyTec RPE padlock proprietary profile with production at the manufactorDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- technical copy protection through WINKHAUS protectBall
- 13,1 mm key shaft for security fittings
-
WINKHAUS keyTec X-tra WINKHAUS keyTec X-tra padlock factory profileDelivery Time: 5 - 6 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- high manipulation protection
- 13,5 mm key shaft for security fittings
-
WINKHAUS keyTec N-tra WINKHAUS keyTec N-tra padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- clear width: 30 mm
- case width: 55 mm
- without forced locking
- manipulation protection
- 13,3 mm key shaft for security fittings
-
EVVA MCS EVVA MCS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,5 mm
- installation depth: 32,5 mm
- for material thickness up to 14 mm
- drilling protection
- picking and scanning protection
-
EVVA ICS EVVA ICS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 28 mm
- for material thickness up to 14 mm
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
-
EVVA 4KS EVVA 4KS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 23,2 mm
- installation depth: 28,2 mm
- for material thickness up to 17 mm
- patented springless curve technology
- picking and scanning protection
Configure locking system 
Compare
