EVVA EPS-5 knob cylinder short

SKU
EV.EPS5.KZ.KL
Producer No. EPS5 KZ 27/27
€36.85
incl. VAT, excl. Shipping Cost
Delivery Time
3 - 5 weeks
factory profile
Please note that the delivery time may be extended for options marked with *!

Product settings

EVVA EPS-5 knob cylinder short (factory profile)

EVVA EPS-5 factory profile (Extended Profile System) is a proven, conventional locking system developed on the tumbler or locking pin principle. The system is characterised by high wear resistance. The exact key centring due to the special profile rib construction ensures that the key can be inserted without any problems. It is a patented, multiple overlapping key profile and the authorization check is carried out on several security levels.

EPS reliably protects private homes, but is also a frequently and gladly used access system in clearly structured locking systems, such as in office buildings, restaurants or residential buildings.

Patent protection until 2041

Basic length:

  • from 27/27 mm
  • max. up to 27/71 mm
  • measured from the middle of cam
  • extension in 5 mm steps
  • Ordering information: the knob is always located on the inside of the cylinder.

Technical characteristics:

  • compact design
  • spring-loaded pin system with 5 active, spring-loaded sensing elements and up to 20 additional side codings
  • integrated manipulation control of the key in the cylinder
  • locking authorisation query by means of core rib profiling and profile locking bar, which is controlled spring-free via a curve in the body
  • carbide drilling protection on the outside in the core and body
  • high wear resistance
  • cam movement 360 degrees, cam removal position 30 degrees
  • width of cam: 9,3 mm
  • certified according to DIN EN 1303:2015 160B0C6B

Execution:

  • conventional locking system
  • length profile system with large key cross-sections
  • patented, multiple overlapping key profile
  • vertical, easy key insertion
  • cylinder body: brass matt nickel plated, cylinder core: base material brass
  • lockable from the outside with key, inside with knob
  • combination with electronic locking system possible

Key:

  • key thickness: 2,3 mm
  • serrated key made of special resistant nickel silver alloy
  • exact key centring: easy insertion of the key thanks to the special profile rib construction
  • with large key cross-sections
  • very resistant, low wear
  • optional: key caps, key with extended key neck

Options / Special equipment:

  • different cylinder finish (Attention: extended delivery time)
  • different knob designs, standard form AK (optional: KK, GK or X1K)
  • modular design

Operational area:

  • front doors, connecting doors, office doors, interior doors, exterior doors, apartment doors, gates, wooden doors, etc.
  • for tubular frame doors or aluminium doors
  • suitable for mortise locks according to DIN, ÖNORM or locks with PZ perforation or according to EU standards
  • office building
  • gastronomy
  • residences
  • for clearly structured locking systems
  • suitable as standard for fire and smoke doors with a fire resistance duration of 90 minutes. This makes the system ideally suited for burglar-resistant doors of resistance classes 1 to 4 without further testing.

Scope of delivery:

  • knob cylinder short incl. 3 or more keys
  • fixing screw M5
  • installation tip: When installing, ensure that there is an external projection of max. 3 mm in conjunction with a fitting that cannot be screwed off from the outside!
  • Security card

EPS is a spring-loaded pin system with 5 active, spring-loaded, sensing elements which offers up to 20 additional side codes. The integrated manipulation control of the key in the cylinder as well as the double-acting locking pins ensure good security.

EPS-5 consists of a length and a transverse profile as well as a pin system - this results in 3 security levels.
The control is carried out in the cylinder core when the key is inserted into the keyway - using the core rib profiling and a profile locking bar, which is controlled springlessly via a curve in the body.

The system is characterized by high wear resistance. The exact key centring due to the special profile rib construction ensures easy insertion of the key.

EVVA EPS-5 Cylinder cross sectionEVVA EPS-5 cylinder cross-section
EVVA EPS-5 Key featuresEVVA EPS-5 key features

How to measure the cylinder length correctly?

You can also find help in determining the correct length in our Help Center for "Cylinder Gauge".

Cylinder finishes:

  • standard finish: nickel
  • optional: brass (front polished), brown patinated, black patinated
  • cylinders in brass or brown are manufactured in modular construction
  • the cylinder knob is delivered in the selected cylinder finish
  • for individual design requirements
  • if desired, homogeneous appearance of door cylinder and fitting
Please note:
If a different finish, different from the standard finish, is ordered, extended production times may occur.
nickelnickel
brass polishedbrass polished
brown patinatedbrown patinated
black patinatedblack patinated


Knob design:

  • knob shape AK: standard: removable knob with three grip recesses
  • knob shape KK: removable, offset, cone knob
  • knob shape GK: removable, offset, round knob
  • knob shape X1K: removable, transverse oval knob
  • standard finish: brass matt nickel plated (AK, KK, GK, X1K)
knob shape AKknob shape AK
knob shape KKknob shape KK
knob shape GKknob shape GK
knob shape X1Kknob shape X1K


Modular design

The modular cylinder is a profile cylinder in which the different cylinder lengths can be adjusted without great time expenditure by means of suitable intermediate parts of the respective locking system. It is mainly intended for use in construction site assembly or for doors whose design may change subsequently. From 27/36 mm. This construction method achieves the class according to DIN EN 1303:2015 160B0C6D.

Modular construction


Key with design cap:

  • colours: black, blue and red, yellow, green and white
  • material thickness design cap: 7,2 mm
  • plastic caps for special design requirements for the keys
  • ergonomic design and high quality for better haptics
  • easy optical differentiation
  • simple management of locking systems through colour assignment
  • consecutive numbering of the key (key with the same locking authorisation receives a consecutive number)
  • use exclusively for EVVA keys
  • factory assembly, subsequent opening and retrofitting is not possible
EVVA EPS design cap
EVVA EPS design cap colors
EVVA EPS design cap

Key with extended key neck:

  • specially shaped key
  • for use with armoured fittings
EVVA EPS key with extended key neck
key with extended key neck
EVVA EPS key with extended key neck dimensions
key with extended key neck dimensions
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account