EVVA MCS knob cylinder

EVVA MCS knob cylinder

MCS (Magnetic Code System) guarantees triple security through one magnetic and two mechanical codings. The permanent magnetisation holds constantly. The cylinder core contains 8 rotating magnetic rotors to which the 4 magnetic pills of the key are assigned. If is the key from keyway removed, they always assume a different position. Each magnetic pill can be magnetised differently on each side.

MCS is ideal for locking systems with high demands on perfection and security. Especially for objects where highly sensitive and irretrievable valuables have to be protected.
Locking system reserves can already be taken into account when planning the locking system.

Patent protection until 2035

Basic length:

• from 31/31 mm
• measured from the middle of cam
• extension 5 mm per side
• Ordering information: the knob is always located on the inside of the cylinder.

Technical characteristics:

• magnetic code system in modular design
• dual authorization queries during the locking process
• freely rotating magnetic rotors to which the four magnetic pills of the MCS key are assigned
• 7 additional springless mechanical horizontal locking elements
• mechanical control by a length profile system and positively controlled locking pin detection on both key sides
• carbide drilling protection on the outside in the core and body
• pulling protection through chrome-nickel connecting axle
• breakaway and core pulling protection
• picking and scanning protection
• impact key protection
• cam movement 360 degrees, cam removal position 30 degrees (right of the knob side)
• width of cam: 9,3 mm
• certified according to DIN EN 1303:2015 16010C6D

Execution:

• reversible key system
• vertical, easy key insertion
• high wear resistance
• cylinder body: brass matt nickel plated, cylinder core: base material brass
• lockable from the outside with key, inside with knob
• combination with electronic locking system possible

Key:

• key thickness: 2,4 mm
• magnetic key made of special resistant nickel silver alloy
• permanent magnets made of Samarium-Cobalt-5 guarantee a long life
• maximum key copying security
• very resistant, low wear
• optional: ergonomic design key, key with colour dot

Options / Special equipment:

• different cylinder finishes
• different knob designs, standard form AK (optional: KK, GK or X1K)
• weather protection
• seawater version

Operational area:

• front doors, connecting doors, office doors, interior doors, exterior doors, apartment doors, gates, wooden doors, aluminium doors, etc.
• for tubular frame doors, security doors
• for mortise locks directed for profile cylinders
• luxury trade, research institutions
• hospitals, international airports
• residences
• office building

Scope of delivery:

• knob cylinder incl. 3 or more keys
• fixing screw M5
• installation tip: When installing, ensure that there is an external projection of max. 3 mm in conjunction with a fitting that cannot be screwed off from the outside!
• Security card