IKON SK6 triangular profile DP06 knob cylinder

IKON SK6 triangular profile DP06 knob cylinder

Premium IKON patented and paracentric triangular profile in system SK6 with 6 active spring-loaded pin locking elements according to DIN EN 1303 and DIN 18252. This profile is based on a long-term patent, which has been developed especially to counteract current and established illegal key-copying techniques, which it impedes to a very high degree. On the key shaft there are triangular profile grooves located on both sides which, due to their special arrangement in the area of the notches of the key, offer not only legal but also increased technical key copying protection.

Patent protection until 2038

Basic length:

• from 30/30 mm
• short cylinder: from 28/30 mm up to max. 28/45 mm
• measured from the middle of the cam
• extension 5 mm per side
• Ordering information: the knob is always located on the inside of the cylinder.

Technical characteristics:

• 6 active spring-loaded pin locking elements for locking security
• paracentric key profile ensures unlocking security
• standard drilling protection due to the hardened cylinder body pin and the first set of steel pins
• high protection against picking and bumping due to special profile design and pin combination
• high level of protection against the burglary method of core pulling due to the clawed cam made of sturdy nickel silver
• tested according to DIN EN 1303, DIN 18252

Execution:

• conventional locking system
• vertical key insertion
• cylinder body and knob finish: brass matt nickel plated
• standard cam position (SST = 30°), other cam positions on request
• combination with electronic possible at any time using transponder key, also as subsequent extension

Key:

• key thickness: 3 mm
• serrated key
• high-quality and stable nickel silver key with square metal bow
• 13 mm key neck for all standard protective fittings and rosettes
• triangular profile grooves on both long sides of the key provide increased technical protection against key copying

Options / Special equipment:

• increased drilling protection class 1 (AB = 1)
• increased drilling protection class 2 (AB = 2)
• different knob designs, standard shape KNF = 2 (optional: KNF = 1F2, only knob finish: nickel silver)
• low-wear version

Operational area:

• entrance doors, connecting doors, office doors, interior doors, exterior doors, apartment doors, apartment entrance doors, etc.

Scope of delivery:

• knob cylinder (type Z534) incl. 3 or more keys
• 1 fixing screw M5 x 85 mm
• Security card

Manufacturer:

ASSA ABLOY Sicherheitstechnik GmbH
distribuce Berlin
Attilastraße 61 – 67
12105 Berlin
www.ikon.de