SKU
IK.SK6.FP04.AZ.Z050
Producer No. SK6 Z050
€70.05
incl. VAT, excl. Shipping Cost
Delivery Time
2 - 4 weeks
factory profile
Please note that the delivery time may be extended for options marked with *!
IKON SK6 flat profile Vector FP04 rim cylinder
SK6 flat profile Vector FP04 is a high-quality IKON profile in special class SK6 with 6 active spring-loaded pin locking elements. This profile is based on a patent, which was specially developed as a measure against current and common opening techniques and makes them very difficult. The profile FP04 is designed as a paracentric profile and optionally has certifications according to DIN, VdS.
Measurements:
- mounting diameter: 29 mm
- rosette: Ø 46 mm
- case length: 27,5 mm
- for door thicknesses from 35 to max. 95 mm
Technical characteristics:
- 6 active spring-loaded pin locking elements for locking security
- paracentric key profile ensures unlocking security
- drilling protection class 1 (AB = 1) standard
- high protection against picking due to special profile design and pin combination
- core pins made of wear-resistant special bronze
- crowned cylinder core head with reinforced key insertion
- for door thicknesses from 35 to max. 95 mm
- protected key profile with security card
Execution:
- conventional locking system
- vertical key insertion
- cylinder body: brass matt nickel plated
- is screwed to a separate mounting plate from the inside with two M5 screws
- combination with electronic possible at any time using transponder key, also as subsequent extension
Key:
- key thickness: 3,6 mm
- nickel silver serrated key with square metal bow
- optional with coloured pins: these can indicate the assignment (e.g. locking authorisations) of the keys, simplifying key management
Operational area:
- garage locks, bar locks, can be combined with case locks
- private houses and apartments
- office and commercial areas
Scope of delivery:
- rim cylinder (type Z050) incl. 3 or more keys
- 2 screws M5 x 30
- 1 screw-on plate
- 1 support ring
- Security card
Drilling protection:
Standard drilling protection (AB = 1):
- for medium safety requirements
- the first pair of steel pins
- a carbide pin in the cylinder body is combined with several carbide elements in the cylinder core
Key with coloured pin:
- optionally with plastic pin in different colours
- simplifies the management of the keys
- can indicate the assignment (e.g. locking authorizations) of the keys
Write Your Own Review