IKON SK6 flat profile Vector FP04 knob cylinder
SK6 flat profile Vector FP04 is a high-quality IKON profile in special class SK6 with 6 active spring-loaded pin locking elements. This profile is based on a patent, which was specially developed as a measure against current and common opening techniques and makes them very difficult. The profile FP04 is designed as a paracentric profile and optionally has certifications according to DIN, VdS.
Basic length:
- from 30/30 mm
- short cylinders from 28/30 mm to max. 28/45 mm
- measured from the middle of cam
- extension 5 mm per side
- Ordering information: the knob is always located on the inside of the cylinder.
Technical characteristics:
- 6 active spring-loaded pin locking elements for locking security
- paracentric key profile ensures unlocking security
- drilling protection class 1 (AB = 1) standard
- high protection against picking by special profile design and pin combination
- core pins made of wear-resistant special bronze
- crowned cylinder core head with reinforced key insertion
- cam made of break-proof, corrosion-resistant nickel silver profile
- tested according to DIN EN 1303, DIN 18252
- protected key profile with security card
Execution:
- conventional locking system
- vertical key insertion
- cylinder body and knob finish: brass matt nickel plated
- standard cam position (SST = 30°), other cam positions on request
- combination with electronic possible at any time using transponder key, also as subsequent extension
Key:
- key thickness: 3,6 mm
- nickel silver serrated key with square metal bow
- optionally with colour pins: these can indicate the assignment (e.g. locking authorisations) of the keys, simplifying key management
Options / Special equipment:
- different cylinder finishes
- increased drilling protection class 2 (AB = 2)
- increased drilling protection class 3 (AB = 3)
- different knob designs, standard shape KNF = 2 (optional: KNF = 1F2, only knob finish: nickel silver)
- weather protection
Operational area:
- entrance doors, connecting doors, office doors, interior doors, exterior doors, apartment doors, apartment entrance doors, etc.
- private houses and apartments
- office and commercial areas
Scope of delivery:
- knob cylinder (type Z534) incl. 3 or more keys
- 1 fixing screw M5 x 85 mm
- Security card
How to measure the cylinder length correctly?
Cylinder finishes:
- standard finish: brass matt nickel plated
- optional: brass matt brushed, brass polished
- the cylinder knob is delivered in the selected cylinder finish
- for individual design requirements
- if a homogeneous appearance of door cylinder and fitting is desired
- There may be slight colour variations between the surfaces shown and the original colours.
Drilling protection:
- for medium safety requirements
- the first pair of steel pins
- a carbide pin in the cylinder body is combined with several carbide elements in the cylinder core
- for increased security requirements
- reinforced drilling protection through additional carbide pins in the cylinder core and cylinder body
- for high security requirements
- drilling protection in the cylinder core and cylinder body consisting of a combination of several special carbide elements
Weather protection:
- corrosion-protected version
- cam and fixing screw made of rustproof material
- surface finish: matt chrome plated
Knob design:
- standard knob shape KNF = 2: small conical knob Ø 28 mm
- optional knob shape KNF = 1F2: round knob with recessed grip Ø 42 mm, finish: anodised light metal
- the standard cylinder knob is delivered in the selected cylinder finish
Knob shape KNF = 2
Knob shape KNF = 2
Knob shape KNF = 2
Knob shape KNF = 1
Knob shape KNF = 1
Knob shape KNF = 1
Key with coloured pin:
- optionally with plastic pin in different colours
- simplifies the management of the keys
- can indicate the assignment (e.g. locking authorizations) of the keys