IKON Radii profile plus

The newly developed and patented IKON radii profiles are based on a high-quality and stable key blank made of nickel silver with 6 active spring-loaded locking elements. The profile match of the key is arranged parallel to the back of the key. The profile features are designed as radii. The specific arrangement of radii on the variable and fixed profile features on the outside of the key makes it significantly more difficult to read and copy keys. A higher key copy protection can also be achieved through the optionally available profile control pin with key catching function. The new radii profile are characterised by high lock picking, scanning and break-ins security compared to conventional key profiles. The system is suitable for simple and larger locking systems.

This system can be ordered as a locking system in our locking system configurator or as a reorder.

Technical characteristics:

6 active spring-loaded pin locking elements according to DIN EN 1303 or DIN 18252 = security against breakins, scanning and lock picking
paracentric key profile with crescent-shaped cuts
with increased technical key copy protection (KCP=KT1) due to profile control pin with key catching function
increased drilling protection as standard due to the hardened cylinder body pin and the first set of steel pins
high pulling protection due to the clawed cam made of sturdy nickel silver
increased protection against picking and lock bumping
core pins made of wear-resistant special bronze
crowned cylinder core head with reinforced key insertion
cam made of break-proof, corrosion-resistant nickel silver profile
DIN EN 1303, locking security class 6
DIN EN 1303, attack resistance class 0, optionally with drilling protection class B/D and pulling protection
protected key profile with security card
patent protection until 2037

Execution:

cylinder body: brass matt nickel plated
vertical key insertion
conventional locking system
combination with electronic possible at any time by transponder key, also as subsequent extension

Key:

nickel silver serrated key with square metal bow
13 mm key neck
ergonomic key head
optional plastic pin in different colours
colour pins: these can indicate the assignment (e.g. locking authorisations) of the keys, simplifying key management

Operational area:

front doors, connecting doors, office doors, interior doors, exterior doors, apartment doors, gates, wooden doors, aluminium doors, tubular frame doors, etc.
for simple and complex locking systems

Special equipment:

increased drilling protection class 2 (AB = 2)
increased drilling protection class 3 (AB = 3)
core extraction protection
freewheel
weather protection
different cylinder finishes
emergency and danger function
low-wear version

Copy protection (standard):

Copy protection with key catch function:

Only original IKON keys may be used, because KCP=KT1 cylinders are equipped with a key catch function that catches and blocks unauthorised copied keys in a certain position.

Increased drilling protection class 2 (AB = 2):

for increased safety requirements
reinforced drilling protection through additional carbide pins in the cylinder core and cylinder body

Increased drilling protection class 3 (AB = 3):

for high security requirements
drilling protection in the cylinder core and cylinder body consists of a combination of several special carbide elements

High drilling protection and core pulling protection (AB=KS):

To protect the core or locking cylinder against pulling, profile cylinders can be supplied with core pulling lock with pulling protection of locking cylinder and integrated drilling protection AB = 3 (AB = 2 for blocking shaft and radii profile extra) (VdS approved).

Freewheel:

The profile cylinders which have a freely rotating cam are designated as freewheel cylinders.
The cam can be moved freely through 360° when no key is inserted.
When the key is inserted, the spring-loaded clutch engages in the cam. This then allows the cylinder to be closed in the conventional way with the key.

Usually only necessary for special panic or automatic locks. If in doubt, please check with the door manufacturer.
for multi-point locks with panic function: latch and bolt must be moved into the lock body when the door is closed with the handle. To ensure this, the cam must be able to turn freely.
in motor-driven locks and special escape door locks
restrictions possible in combination with other optional equipment

Weather protection:

corrosion-protected design
cam and forend screw made of rustproof material
surface finish: matt chrome plated

Cylinder finishes:

standard finish: brass matt nickel plated
optional: brass matt brushed, brass polished
for individual design requirements
if desired, homogeneous appearance of door cylinder and fitting
There may be slight colour deviations between the displayed surfaces and the original colours.

Emergency and danger function:

This function enables the locking cylinder to be locked/opened even if a key with locking authorization is inserted on the opposite side (e.g. for front doors and emergency doors).