DORMAKABA expert plus half cylinder

SKU

KA.expert.HZ

Producer No. Kaba expert plus/HZ

Skip to the end of the images gallery

Skip to the beginning of the images gallery

€70.50

incl. VAT, excl. Shipping Cost

Delivery Time

3 - 4 weeks

proprietary profile with production at the manufactor

Please note that the delivery time may be extended for options marked with *!

Product settings

locking type

single lock

keyed alike

cylinder length outside

cylinder finishes

drilling protection

weather protection

number of keys

standard key

colour selection colour clip

largekey (clip and long bow)

colour selection largekey

long bow (armour bow)

colour selection - special requests

Qty

Details

DORMAKABA expert plus half cylinder

DORMAKABA expert plus benefits from a high level of security thanks to the sophisticated technology within the locking cylinder. DORMAKABA expert plus locking cylinders protect against the most common opening methods (picking and impact protection).

DORMAKABA expert plus cylinders are ergonomically correct reversible key systems, which means that the DORMAKABA reversible key is inserted vertically into the cylinder channel. The locking positions on each cylinder side are arranged in 4 rows radially around the key. The cylinder is thus reliably protected against illegal opening methods - even with modern tools.

Patent protection until 2033 and unlimited trademark protection

Basic length:

from 30/10 mm
measured from the middle of cam
extension in 5 mm steps

Technical characteristics:

technical and patent copy protection offer high key copy protection
4 radially arranged rows of hardened steel pins
up to 22 pin pairs per cylinder side in several rows on 44 possible positions (over 907 billion possible lockings)
spring-loaded pairs of locking elements made of hardened steel, chemically nickel plated
standard drilling protection (hardened steel locking elements and a 4 mm thick fixing screw made of hardened steel additionally on each cylinder side in the cylinder body)
high security against picking and the impact method
classic door cylinder in 17 mm Euro profile, core diameter: 15 mm
modular system design
tested according to DIN EN 1303:2015 locking security class 6, attack resistance class B in the optional lamella version or with protective fitting
certifications: DIN 18252-82 | VdS class B and BZ | Kitemark
other cylinder shapes: e.g. swiss round profile

Execution:

ergonomically correct reversible key, i.e. the DORMAKABA reversible key is inserted vertically into the cylinder channel
easy key insertion due to new design of the locking elements
cylinder body: nickel-plated brass
cam: 2 x 12-fold adjustment possible (note: to adjust the cam, you have to open the rear cover either with a cent piece or a very flat slotted screwdriver)
integration into electronic DORMAKABA locking systems with LEGIC Clip possible at any time (retrofittable), mechanical lock remains unchanged

Key:

key thickness: 2,5 mm
reversible key made of high-quality nickel silver, low-wear
reversible key that is technically difficult to copy
the new coding on the tip of the key cannot be produced with conventional key cutting machines; if the coding is missing, a key cannot be inserted or turned
high breaking resistance
3 different key types, standard key: smartkey (optional largekey, long bow)
colour clip standard: dark blue (selectable from 12 colours)

Options / Special equipment:

different cylinder finishes
increased drilling protection according to VdS B, increased drilling and pulling protection according to VdS BZ, pulling protection
weather protection (SEW)
dust and insect protection (SIS) (on request)
long bow with and without key clip
locking cams (on request)

Operational area:

additional locks, garage doors, sheds and side doors
private houses and apartments
industry, office buildings, airports, hospitals
flexibly usable for simple up to complex locking systems

Scope of delivery:

half cylinder incl. 3 or more keys
1 fixing screw M5 x 85 mm
Security card

Technical details

Reversible key that is technically difficult to copy

The reversible key is technically difficult to copy. The keys are not coded by drilling, but by a special milling process that conceals the position of the coding on the key. The key is made of nickel silver and is highly resistant to breaking, has excellent sliding properties and lowest wear. New design of the locking elements allow the key to slide even more easily into the key channel.

High security against picking and the impact method

With the rapido method, conventional locking cylinders can be opened - without leaving any traces - with a specially made key and a hammer. The DORMAKABA expert plus system is protected against this.

DORMAKABA modular

The DORMAKABA modular system allows cylinders to be converted to other lengths or even other cylinder shapes on site with little effort. The locking system remains intact.
The inserted cylinder cores (inserts) can easily be used in other cylinder designs (half cylinders, knob cylinders, camlock cylinders, etc.).

DORMAKABA expert plus reversible key

4 radially arranged pin rows

DORMAKABA modular

Closing cam position - carrier adjustment

Standard setting: 30° right with marking point seen from the front of the cylinder

1. unscrew the cover on the back of the cylinder using a coin or screwdriver
2. remove clutch and driving hub
3. set up the cylinder on the template and turn the driver to the desired position
4. push the driving hub into the body according to the sketch
5. insert the clutch into the driving hub
6. screw the cover back in until it is level with the body

How to measure the cylinder length correctly?

You can also find help in determining the correct length in our Help Center for "Cylinder Gauge".

Options

Standard drilling protection

The standard drilling protection is achieved by standard hardened steel locking elements and a hardened insert fixing screw (A). This design complies with DIN EN 1303 attack resistance class B.

Increased drilling protection - VdS class B approval

By using additional steel elements in the body and insert, a higher resistance to drilling is achieved. Class B locking cylinders do not have an integrated pull-out protection. In combination with a tested core protection fitting, attack resistance class D is achieved.

A = insert with two carbide longitudinal pins = BS
B = tungsten carbide stud
C = short insert fixing screw hardened at the front
D = long insert fixing screw hardened at the rear

Increased drilling and pulling protection - VdS class BZ

By using additional steel elements in the body and insert, a higher resistance to drilling is achieved. The increased pulling protection values are achieved by means of a pulling protection pin.
The new DORMAKABA VdS cylinder protects against pulling even in tubular frame doors.
These cylinders can be used without protective fittings and achieve attack resistance class D without a tested core protection fitting.
The steel lamella option is not possible in the semi-cylinder with this design.

A = insert with carbide pins = BS
B = tungsten carbide stud
C = cross bolt
D = insert fixing screw hardened

Pulling protection

A = tungsten carbide stud
B = cross bolt
C = insert fixing screw hardened

Cylinder finishes:

standard finish: nickel plated (silver-coloured)
optional: brown medium, brass natural (gold-coloured), black
for individual design requirements
if desired, homogeneous appearance of door cylinder and fitting

Please note:
If a different cylinder finish, different from the standard finish, is ordered, extended production times may occur.

nickel plated

brass natural

brown medium

black

Dust and splash water protection

Cylinders with dust and splash water protection are equipped with a spring-loaded dust and weather protection cap with 2 spring-loaded sealing lips on the cylinder face. Every Euro profile cylinder can be equipped with this function. The outside length of the cylinder is extended by approx. 5 mm.

Dust and splash water protection is supplied in standard color nickel plated (silver colour).

Cannot be used for cylinders with pulling protection devices and for protective fittings.

Dust and insect protection (on request)

The new SIS element is optimised for use with Euro profile cylinders and offers effective protection against the penetration of dirt and insects into the key channel. The outside length of the cylinder is extended by approx. 3,5 mm.

The SIS unit can be easily retrofitted as it is decoupled from the body and is mounted directly on the rotor. As a result, only the cylinder insert needs to be replaced, the rest of the cylinder is not affected by the upgrade and can continue to be used 1:1.

If the cylinder front is to be level, the option dust and splash water protection must be selected.

Not available in conjunction with VdS versions.

The SIS cap is always chemically nickel-plated.